LPS-185-U & LPS-188-U
LPS-185-U & LPS-188-U series are double acting cartridge design unbalanced Mechanical Seals suitable for Slurries, Sludge’s, Syrup, Water, Oil & Chemicals used in low & high pressure pumps. These seals are independent of direction of rotation, pre assembled cartridge unit easy to install with different PCD’s pumps due to slots provided on gland plate and these seals can be offered in balanced and unbalanced configuration. As all parts are Interchangeable, one can convert this series LPS-185-U to LPS-188-U by changing only the dynamic ring and the secondary seal, this principle is ideal for stock rationalization, this seals are comfortable to use in wide range of application.
LPS-191-U
LPS-191-U series is double acting cartridge design unbalanced Mechanical Seals suitable for Slurries, Sludge’s, Syrup, Water, Oil & Chemicals used in various types of equipments. These seals are independent of direction of rotation, pre assembled cartridge unit easy to install with different PCD’s equipments due to slots provided on gland plate. One side of seal is installing in stuffing box and the other side is on outside of stuffing box, in case one seal leakage however, continues working from other seal. These seals can be offered in balanced and unbalanced configuration, this seals are comfortable to use in wide range of application.
Material of Construction:
Seal Faces: (Dynamic & Stationary Ring)
Carbon, Ceramic (99.5%), Silicon Carbide, Tungsten Carbide & which are suitable for fluid
Secondary Seal:
Viton, Silicon, Aflas, Kalrez, PTFE, GFT
Hardware & Spring:
SS 316, SS 304, Carpenter-42, Alloy-20
Application:
- Slurry pumps
- Food industries
- Water treatment
- Pulp & Paper industries
- General & light chemicals
Seal Characteristics:
- Unbalanced / Balanced
- Single acting
- Inside mounting
- Independent of direction of rotation
Operating Parameter:
- Shaft diameter : 16 mm to 66 mm (0.65” to 2.60”)
- Pressure : Up to 20 bar (kg/cm²)
- Temperature : -45 °C to 180 °C
- Shaft Speed : Up to 3000 RPM