Best Dry Running Mechanical Seals Supplier
Dry Running Mechanical Seals – We are one of the best dry running mechanical seal manufacturers, manufacturing most advantageous dry running single mechanical seal and dry running double mechanical seal. Being one of the top dry running shaft seals and dry running mechanical seal suppliers, manufacturers and exporter, we offer both the dry running single mechanical seal and dry running double mechanical seal of remarkably high quality raw materials.
We provide both the mechanical seals and dry running rotary shaft seals with extremely high quality. They are particularly straightforward to use and uncomplicated to apply in operations.
Being the top dry running mechanical seal supplier, with both dry running single mechanical seal and the dry running double mechanical seal manufacturing, we also manufacture best metal bellow seal, rubber bellow mechanical seal, mechanical seal for agitator and also provide rotary joints manufacturing as being best mechanical seals manufacturers in India.
LPS-201-B series is factory assembled with dynamically tested units reverse balanced Mechanical Seals developed for Mixers, Agitators, SS & Glass Lined Vessels. These seals are independent of direction of rotation, this seal is a multi spring externally mounted design with O-Ring as a secondary sealing member; these seals are basically used on top entry agitators as Dry Running Seals. The advantage of these seals are doesn’t require any lubricant or quenching systems so they are known as dry running seals, various faces materials & elastomers can be offered for wide service application as below:
Material of Construction:
Seal Faces: (Dynamic & Stationary Ring)
Carbon, Silicon Carbide, Tungsten Carbide & which are suitable for fluid
Hardware & Spring:
SS 316, SS 304, Hastelloy-C, Monel, Alloy-20
- Food products
- General light chemicals
- Pharmaceutical products
Dry Running Mechanical Seals Characteristics:
- Dry running
- Single acting
- Outside mounted
- Reverse balanced
- Independent of direction of rotation
- Shaft diameter : 25 mm to 150 mm (0.1” to 6”)
- Pressure : Up to 15 bar (kg/cm²)
- Temperature : -20°C 150°C
- Shaft Speed : Up to 500 RPM